TPO waterproof membrane price(s)

basic information
Categories:
TPO Waterproof Membrane
heat
没有此类产品
Description

TPO waterproof membrane is a type of polymer waterproof material based on polypropylene and rubber, prepared by existing technique. It is recycling throughout its service life. There is no chlorine, heavy metal nor elements harmful to the roots and it is environmentally friendly.

Supply
Advantages
Application
Installation

*Packing: 2m x 20m (40㎡/roll)

*The thickness, width, length and color can be made based on customers’ requirements.

• Excellent weather resistance, aging resistance, tensile strength and elongation.

• Operation can be done on wet substrate. Directly expose to the weather conditions without any protective layer. Simple construction. No contamination.

• Repeat welding is possible.

• White color TPO to increase reflection of sun rays.

• Ability of resist the growth of mould and algae.

• Mainly apply to the roof waterproofing construction of industrial, civil and public buildings.

• Membrane reinforced with mesh (TPO-P) is applied to the single ply roof waterproof system by mechanical fastening.

• Membrane with underlying layer of fabric (TPO-L) is applied to the concrete substrate by full adhesion waterproof system.

• Homogeneous membrane (TPO-H) is applied to the flashing area.

 

All Surfaces

It is important to prepare sound and solid substrate for installation of membrane to eliminate movement during the concrete pour. Substrates must be uniform and smooth and there shall be no gaps or voids in surface greater than 12mm.

Horizontal Concrete Blinding or PCC

The substrate must be smooth and uniform and shall be free of all unsound aggregate and sharp lumps. Curved or rounded substrates should be avoided. For installation of Kintop PVC, the surface does not need to be dry, but standing water must be removed.

Vertical Sheet Piling

Kintop PVC can be used for blind side waterproofing after either using geniting, concrete, or plywood or other suitable material to provide uniform surface for membrane installation.

Membrane Installation

Kintop TPO, pre-applied fully bonded HDPE Membrane should be overlapped using steel roller to ensure complete bonding and to achieve continuity. Kintop TPO, pre- applied waterproofing membrane can be installed at temperatures of -5°C and above. When installing Kintop TPO waterproofing membrane in cold weather, care should be taken to pre-heat the bonding edge with appropriate means such as hot air gun or other similar means.

 

Copyright © 2019 Jinding waterproof technology All rights reserved. 

 Powered by 300.cn     鲁ICP备13022271号-2